PulseGuard Pulsation Dampeners
PulseGuard Ltd. and Inc.
PulseGuard offers pulsation dampers. | Please Phone 910-270-2737
We have people not voicemail | Call toll free UK 08080-567-7423
Fluid Flow Control Animations by Liquid Dynamics
FLOW FLUCTUATION SMOOTHING
On a Typical "A.O.D.D." Pump with Flexflon

A.O.D.D. pump with LP and HP Flexorber color schematic

Simply How it works:

1. Flow rarely goes above 15 MPH/24 KPH. There is time for it to go up a single connection come to a halt, and flow back out again, to keep the liquid moving whilst the pump is changing from one stroke to the next.

2. By smoothing the flow in this way, the pump does not have to generate pressure peaks to accelerated the liquid with each stroke.

3. Flow smoothing reduces the pressure pulsation a pump must create to overcome the resistance that your system has caused.

4. The response of your system to the residual level of flow fluctuation, is usually at a higher frequency, and travels as pressure waves at typically 3500 MPH/5600 KPH.

5. To address pressure wave pulsation, intercept this pressure pulsation with flow-through pulsation dampers. ("See Pressure Pulsation Damping")

This, single connection approach to flow smoothing, requires the use of a "t" piece. This method does not ensure in place flushability for service technician protection. Use of a flow smoother with a single connection, can not guarantee pressure stability, [or at all above 10 Hz] without first having made a system pipework, etc. analysis.

Cushion Pre-fill Pressure:

For volumetric flow fluctuation smoothing, 80% of line pressure.

Installation. For best results: Keep the distance between flow smoother and pump to no more than 10 pipe internal diameters.

For dimensions see Inventory price list
LP Flexorber SoG, cross sectional labeled cut sheet

To ensure that neither air nor gas bubbles collect & cause the pump to loose prime, install with liquid connection at the top.

For Suction Systems:

For optimum performance ensure a straight line from the pump connection the diaphragm in the damper.

For the Discharge of Pumps with horizontal connections:

for suction systems install SoG damper with the liquid connection at the top

for the discharge of pump with horizontal connections place the LP Flexorber on it's side


For cheapest and most effective DAMPERS - use small or large elastomer dampers. Click here
For information on plastic dampers, click here

PDF of this page

Pressure Pulse Dampening

by
PulseGuard Ltd. and Inc.
To top of page
Return to Smoothness Level to smoothness level

Return to the beginning of PulseGuard, pulsation dampeners

Selecting Pulsation Dampeners for Different Pump Systems.
Flow through pulsation dampers are at least 3 times more efficient than T off line accumulators.
Dampeners that do, flow goes through, but pressure pulsation does not.
PulseGuard Ltd. and Inc.The Smooth Flow People

Call Toll Free 1-888-DAMPERS (326-7377) / See also: Pulsation-Dampeners.com for a pulsation dampener.