Dampers General Table of Contents

PulseGuard offers pulsation dampers. | Please Phone 910-270-2737
We have people not voicemail | Call toll free UK 08080-567-7423

In the presence of any lube oil or Hydrocarbon, N2 Nitrogen is mandatory
Otherwise Air

PROCESS
LIQUID
"pumpage"

Dupont "TEFLON"
(Virgin) V-PTFE
(Modified) M-TFE
Flexflon
Ceramic Balls

ELASTOMERS
(Sunthetic Rubber) EPDM, Buna Bitrile, FluotoCarbon Elas. Butyl, SiliconElast., Etc.

Metals: Stainless, Duplex (2205, F-51, UNS S31803) and Super Duplex (2507, S32750), A20, HC276, Tit.2, Tanatalum, Zircomium Etc.

PLASTICS
examples P.V.C. Poly Propylene

Cooling / Heating Jacket fluid, or Transfer Fluid in Food & Drug units

PICTURE SYMBOL	FEATURES & DETAILS	MARQUE MARK NAME LINKS
	High impermeability M-TFE "FLEXFLON" diaphragm or Virgin PTFE "TEFLON", with Stainless Steel etc. housings.	FLEXORBER SoG for Low Pressure - part numbers
	With "FLEXFLON" or "Teflon" diaphragms, Secondary containment sealing, hazard alert ports, 2 diaphragm layers, with track to alert ports from between them.	FLEXORBER FL"O" for High Pressure - part numbers
	Pressure pulse damping & flow fluctuation removal for the CPI. 8:1 Diameter Ratio pipe: shell ensure damping Large Diameter shells at low cost - liquid is in bladder minimizing use of high cost metals.	PIPEHUGGER PHr for High Pressure - part numbers
	As above, but for low pressure and suction acceleration head loss. Light weight, requires no supports. Male connections at 1" - 3", 25mm - 75mm and above.	PIPEHUGGER PeG for Low Pressure - part numbers
	For Clean In Place systems flushed at below operating pressure. Examples: Foods, Drugs, Liquid Chromatography, Beverages. Inlet outlet connections widely spaced & colume from top half is less than can drive the process diaphragm fully down.	TUBEGUARD TuG "piggy-back" - part numbers
	Slim & long, enables reasonable cost for all stainless shell. Small diameter stiff gas bag suits flow fluctuation removal. Some pressure pulse damping capability from flow through configuration. Partially flushable.	PIPEGUARD PiG-LP for Low Pressure - part numbers
	Available from solid billet, for medium, high, and ultra pressures. Pipe thread, Hubs, and super pressure fittings all standard. 23 different gas bag materials in inventory. More than 33 years of marine and industrial expertise.	PIPEGUARD PiG-HP for High Pressure - part numbers
	With a maximum design pressure of 225 psi, 15 Bar at 60 F/15 C, 1/8" 3mm through 6" DN 150mm Flanged. 1 in 3 15ml. through 10 gallon 40 Liter, PVC or PP.	PIPEGUARD PiG-Plas for Plastic Pipe Sytems - part numbers
	PUMPGUARD -PuG- With uninterrupted "CLEARFLOW" end to end, designed for suction, sludge, slurry, easily flushable and even rodable. Available with food industry trim and with flow tube from FDA approved elastomer ingredients. WAVEGUARD -WaG-CeR- No Moving Parts no bladder to gas up, no foam to degrade. Multi-path dispersal. WAVEGUARD -WaG-H.O.- Multi-path dispersal & the Helmholtz principle	PUMPGUARD PuG - part numbers
		WAVEGUARD WaG - part numbers
		WAVEGUARD WaG - part numbers
	Suction Cavitation Prevention Damper. No Moving Parts no bladder to gas up, no foam to degrade.	CAVGUARD CaGss - part numbers
	Cooling or Heating Jackets are redily available using the shell of the next size of unit larger than the damper size that you need, as the jacket. Available all types above 60 in3 1.0 Litre	JACKETED JKT - - part numbers
	Ferric Chloride, Sodium Hypochlorite Water Treatment systems. Strength & Safety of metal housings with resistance of elastomer & plastic parts. 3 types	DOUBLEGUARD DE Double Ender - part numbers

Back to top

Selecting Pulsation Dampeners for Different Pump Systems.
Flow through pulsation dampers are at least 3 times more efficient than T off line accumulators.
Dampeners that do, flow goes through, but pressure pulsation does not.
The Smooth Flow People

Call Toll Free 1-888-DAMPERS (326-7377) / See also: Pulsation-Dampeners.com for a pulsation dampener.

CONTENTS