flo tabulation

ORDERING - PART NUMBER					Dampers $s US		Inches		Lbs.
MODEL Type	In 3	PSIG	Material	Connections	Spares Kit	Net 1 pc. F.O.B.	LENGTH	DIAM.	WEIGHT
<2000 PSI	@ 200° F			SYS.NPT x PMP.NPT	SK#-	Hampstead NC USA	L Max	D Max	(add fittings wt.)
FLo-SS	1.5i /2000p / 316			1/8"Mx1/8"M	DW 85		5.3	6.0	25
FLo-SS	3.0 i /2000p / 316			1/4"Mx1/4"M	DW 93		5.3	6.3	30
FLo-SS	7.0i /2000p / 316			3/8"Mx3/8"M	DW 113		5.3	6.5	32
FLo-SS	10i /2000p / 316			1/2"Mx1/2"M	DW 127		5.3	7.0	35
ABOVE 2000 PSI SERIES AUTOCLAVE/ PPI, or with Tech/Secure/Lloyd/Lock Hubs also available for additional charge.
FLo-SS	0.5 i /3000p / 316			1/8"Mx1/8"M	DW 65		3.5	5.3	12
FLo-SS	1.5i /6000p / 316			1/8"Mx1/8"M	DW 85		5.6	6.3	25
FLo-SS	3.0i /4000p / 316			1/4"Mx1/4"M	DW 93		5.5	6.3	33
FLo-SS	3.0 i /6000p / 316			1/4"Mx1/4"M	DW 93		5.6	6.3	36
If only 1 connection is used, EX. for flow fluctuation removal [instead of pressure pulsation interception], the other port saves the need for a a system "T" for drain valve, or RV, or gage. Single connection is available but as a non inventory item.

SS=316 dual certifies
stnlss stl

DSS=duplex stainless

SDSS=superduplex stainless

M=male connection

F=female connection

Standard Flexorber HP NOT IN INVENTORY:
SHORT LEAD TIME LARGE VOLUMES
Vol.	Diaph.mm	Max	*Max	D	L	Wt.
	Nbr.PTFE	PSI	Cnctn.	In.	In.	Lbs.
In3	+epdm	@200F	inch pipe
10	DW127	7000	0.50F	8.0	6.75	80
15	DW145	6000	0.50F	10.0	7.5	130
25	DW160	5850	0.75F	10.5	8.25	190

40	DW175	5750	1.00F	12.0	9.5	240
61	DW187	5500	1.00F	12.5	10.0	300
80	DW200	5250	1.25F	13.5	11.0	350

122	DW223	5000	1.50F	14.0	11.5	400
180	DW265	4500	1.50F	16.0	12.5	550
240	DW280	4000	2.00F	17.0	13.0	675

300	DW305	3500	2.50F	18.0	15.2	800
400	DW345	3000	3.00F	20.0	17.0	1200
800	DW450	2500	3.00F	30.0	20.0	3000

Flexorber HP Special Metals Dampers -
Metals: Alloy 20, Hasteloy 22, B33, Inconel, Titanium, Zirconium, Tantalum, Linings, etc.

Special Materials Dampers have Male Connections